Vision Assisted Inspection System

THE INSPECTOR by Cluso-Au

Simplicity That Works:

The Inspector is an automated inspection system that has been developed to aid manufacturing in First Article Inspection, Visual Inspection of short run assemblies, and Final QA Inspection before shipment

A quick set up will reduce the time for a first article inspection to minutes vs. hours

Subsequent Inspections can be compared to the original sample and viewed in the “Auto Tracking” view port that is superimposed over the main image area.

The step by step operation will increase inspection accuracy, therefore making “The Inspector “ an excellent quality assurance tool.

Finally a system people can use :

þ No long programming times

þ Uses existing manufacturing data

þ Minimal operator training required

þ Steps through the BOM as it inspects

þ Inspect parts at amazing speed and accuracy

Inspector workstations can be networked together to share manufacturing data

Main screen

	Compared Image

Inspection Made Simple:

þ Scan First Article Assembly.

þ Import PCB coordinate data directly from P&P machine or CAD software..

þ Comparison checking against First Article PCB.

þ Save as a Master Sample for QA traceability, later viewing, or comparison checking.

þ Ready to work within minutes of installation. Minimal training required.

Hardware Specifications:

Computer: Standard Windows.

Inspector Software with data import wizard

Inspector: 1200 DPI Optical Res. 3D Scanner .

Fixture to hold PCB